jackman.stanford.edu/blog
• 114th U.S. Senate
• ideal point estimates svg pdf csv 1/30/15
• scatterplot against 2012 Obama vote share svg pdf
• roll call object: RData
• 114th U.S. House
• ideal point estimates svg pdf csv 1/28/15
• scatterplot vs Obama vote share svg pdf
• roll call object: RData
• Bayesian Analysis for the Social Sciences Wiley; Amazon; errata as of 5/23/13

## Monday April 30, 2012

Filed under: Australian Politics — jackman @ 6:45 pm

Sportbet went dark around about midnight Sydney time. It came up again around about 3am with the ALP out to 4.65 to the Coalition’s 1.19. Centrebet jumped from 4.40/1.20 to 4.65/1.18 in the last hour. See the last 24 hours of the Centrbet, sportingbet and sportsbet here.

Nothing like a lop-sided Newspoll to move the betting markets.

### The next Labor Prime Minister of Australia…

Filed under: Australian Politics — jackman @ 9:14 am

Rudd. But I agree that it isn’t happening anytime soon.

It goes something like this. The party goes down the gurgler at the next Federal election. Rudd is the sole QLD Labor MHR.

And — this is the fanciful part — Rudd becomes PM again around about 2019 (taking two terms to recover from 2013). He’d be about 62 years old.

Menzies was PM for less than 3 years, April 1939 to August 1941; Rudd’s tenure was 82 days longer than Menzies’ 1st go. Then Ming got back in 1949 and stayed there for 16 years.

Other repeat PMs are Deakin (3 separate terms) and Fisher (also a QLD Labor PM).

Just saying…

## Friday April 27, 2012

Filed under: Australian Politics — jackman @ 2:15 pm

Coalition at 1.20. Rarely has the national level betting market been so lop-sided. Rarely has a sitting government looked so doomed.

The Coalition blew out to nearly $5 in the dying days of the 2007 election campaign. And the Coalition was above$4.50 now and then in 2009.

## Wednesday April 4, 2012

Filed under: Australian Politics,R,statistics — jackman @ 12:40 am

Labor won 15 of Queensland’s 29 House of Reps seats in the 2007 Federal election (AEC details here). Yet just three years later, in the 2010 Federal election, Labor won only 8 of 30 Queensland Reps seats, with 33.6% of 1st preferences (a swing of -9.3 percentage points).

Labor’s best performance on 1st preferences in 2010 was in Capricornia (46%), which translated into a 54-46 2PP result. Kevin Rudd won Griffith with 44% of 1st preferences, resulting in a 58-42 2PP result. Wayne Swan and the LNP candidate split the 1st preferences in Lilley, 41-41, with Swan winning the seat with Green preferences, 53-47 2PP. Labor managed to get home in Moreton in 2010, with 36% of the 1st preference vote, and a 51-49 2PP result.

The state election of some 10 days ago was conducted under different district boundaries (89 seats in the Queensland parliament) and a different electoral system (optional preferential). Moreover, the Katter Australia Party ran candidates in 76 seats, winning 11.5% of 1st preferences, further complicating comparisons with previous elections (state or federal). In any event, Labor won about 26.7% of 1st preferences (ECQ results), down 6.9 percentage points from its performance in the 2010 Federal election, and down a staggering 15.6 percentage points from the 2009 state election.

How might these 2012 state-level results translate into Federal results?

There are many different ways of looking at this, all of which involve a little guesswork and assumptions given the differences in the two electoral systems, the configuration of parties and so on.

Here’s a stab that I’ve been working on over the last week or so (“Spring Break” here at Stanford). The AEC conveniently (!) geo-codes its polling places and publishes that data on its web site. Shape files for Federal electorates are also available. This makes it feasible to start re-aggregating booth-level results from the state election up to Federal seats.

A few steps and assumptions are required (and I’ll write this up at some point):

• Parse the ECQ’s XML presentation of the 2012 state election results; I used the XML package in R. By the way, it is terrific that both AEC and ECQ put the XML’d version of their results up in real time; reasonably sane schema, relatively easy to parse, etc.
• geo-code the state polling places. ECQ doesn’t put lat/lons of its polling places up on its web site, at least not that I could find. I thought about hacking its Google maps overlay javascript, but that was beyond me, and the maps there seemed to only provide a rough guide as to the actual locations of ECQ polling places.
• My next move was to recall that there is tremendous overlap between state and Federal polling places, at least in metro areas. I wrote some code to look for matches between the strings describing state and Federal polling places. I also wrote some code that asked the Google maps API to return lat/lons of the addresses associated with each state polling place, which turned out to be quite imprecise once you get away from metro areas. But between Google and the AEC geo-codes, I was able to come up with usable geo-codes for 2,100 ECQ polling places (all of the ECQ’s actual polling places). I performed more than a few sanity checks and manual corrections on the geocodes (“visiting” many Qld schools and community halls in Google maps), and actually corrected some of the AEC geocodes too. It is then straightforward to map these geocoded state booths into Federal electoral divisions using functionality in the sp package in R.
• In the 2012 Queensland state election, only 75.7% of ballots were cast at actual polling places on Election Day (ECQ). The remaining ballots were cast using a variety of methods: pre-poll votes, postal votes and Election Day absentees being the three most used methods. Fun fact: 41.2% of Burleigh’s ballots were cast this way, the most of any QLD electorate. I allocated these (state-level) non-standard votes to Federal seats in proportion to the spread of the state seat’s regular, polling-place votes across Federal seats (fun facts: the state seats of Algester, Everton, Maryborough and Springwood each take in 4 Federal seats; 25 of the 89 QLD state seats lie wholly within one of Qld’s 30 Federal seats).
• There is perhaps a little more work to do refining the way I handle state booths that lie outside but very close to a particular Federal seat, say, where that booth is also used in Federal elections and for the Federal seat in question. That is, the AEC is telling us that we’ve got a polling place outside the electorate boundaries; surely some (all?) of the state votes cast at that booth should count towards the estimate we make for the “logical” Federal seat, not the “physical” Federal seat. Some of these booths serve multiple Federal seats, suggesting some kind of proportional allocation heuristic. I’m yet to do this last bit of fiddling; life is short and Spring Break is over…
• Turnout! No one ever talks about this. But get this. The ECQ has 2,468,290 ballots cast, corresponding to 89.9% turnout (2,746,844 total enrolled). In the 2009 state election turnout wound up being 91.0%. In the 2010 Federal election turnout was 92.8% (2,521,574 ballots; 2,719,360 enrolled), down 1.6pp from 2007 (by the way). But the point is that state-level turnout trails Federal by about 2 to 3 percentage points. You wonder about the partisan leanings of those voters not turning out in state elections, but coming out for the Federal election.
• I also wonder how much any effect here might be offset by the differences in informality state to Federal, OPV to full preferential. 5.5% of House votes cast in QLD in the 2010 Federal election were informal; the corresponding figure for the 2012 state election (OPV) is just 2.5%.

So what do you get when do this re-aggregation, subject to all the caveats sounded above? Keep in mind I only have 1st preferences, at least for now.

The figure below (click for full-size) shows a scatterplot of imputed Federal results for the ALP given the 2012 state results, for each of Queensland’s 30 Federal seats, against the ALP’s actual 1st preference vote share (%) recorded in the 2010 Federal election. The diagonal line is a 45 degree line, a “no difference” line. On average, the data points lie below the diagonal, indicating what we know, that Labor did considerably better in the 2010 Federal election than in the 2012 state election.

Red dots and labels indicate the 8 seats won by Labor in 2010. The good news (!?) for Labor is that the Federal seats in which its primary vote utterly cratered are seats in which it had no chance of winning in the 1st place, where its 2010 1st preference vote share was below 30% or barely above 30% (e.g., Wide Bay, Maranoa, Fairfax, Wright, Fisher, Hinkler).

The bad news for Labor is that it would seem that most of its 8 Federal, Queensland seats are at some peril, with the exceptions perhaps being Griffith (Rudd’s seat), and maybe Rankin (Craig Emerson) and Oxley. The estimated ALP 1st preference vote share given the 2012 state results in these 3 seats lies above the actual ALP 1st preference recorded in Moreton in 2010, which was Labor’s weakest among the 8 seats it won in 2010 (and observe the many assumptions implied in that extrapolation).

Lilley — Swan’s seat — will be interesting. I grew up in Lilley on Brisbane’s northside. When Labor is really on the nose, it goes to the Coalition. Swan lost the seat in 1996 in his sophomore election, but has held it since 1998. I’m not sure the last redistribution helped, and its tough to see Labor win it if its primary vote share slips below 35%. Complicating factors are what role might the Katter party play, as well as some kind of “personal vote” for Swan (an incumbent Federal Treasurer, no less).

I also show the implied swings given by these estimates of ALP 1st preference vote share (bigger version available by clicking):

This presentation of the data highlights that Griffith (Rudd’s seat) has the smallest implied swing among Labor’s 8 seats, around about 5 percentage points. Coupled with the fact that Rudd starts off at a tolerable level of 1st preference support, this bolsters confidence that Griffith remains Labor’s best shot at a “retain” in 2013.

The implied swing in Moreton is only a little larger, but there is far less buffer there. Swings of -7 to -8 percentage points on 1st preferences in Lilley, Rankin and Oxley would have to be almost surely fatal to Labor’s chances there. And double digit swings in Petrie, Blair and Capricornia would also have be beyond the margin of survival.

Could Rudd be the last (QLD, Labor) one standing?